Steel Reinforced
Steel reinforced crane rail pad is available for heavy duty crane runway applications.
Tel: (+1) 724-695-3406
Featured Products
Moderate Duty
Steel reinforced crane rail pad is available for heavy duty crane runway applications.
Intermittent
Molyneux IP crane rail pads are designed for runways where the rails are discontinuously supported.
Moderate Duty
Moderate Duty
For use with lighter crane wheel loading.
Molyneux moderate duty crane rail pad is manufactured from wear resistant synthetic elastomer which is unaffected by oil, grease, ozone and exposure to ultraviolet light. The crane rail pad incorporates a bonded steel strip which is encapsulated in the synthetic elastomer. Moderate duty crane rail pad is for heavy duty crane applications. For the best results we recommend the use of Molyneux cam adjustable rail clips in conjunction with the crane rail pad.
Specifications
| Thickness | Shore Hardness | Temperature Range | Ultimate tensile strength | Rebound resilience | Elongation | Permanent set |
|---|---|---|---|---|---|---|
| 7mm | 75 +/- 5 | -20°C to +100°C | 11N/mm sq. | 27% | 280% | 10% |
Features & use
For use with lighter crane wheel loading.
- Reduces noise and structural vibration
- Reduces rail wear and fatigue
- Reduces crane runway maintenance
- Reduces stress in the runway structure and the crane
- Totally resistant to water, oil, grease, mildew and fungus
- Absorbs the uneven contact between the rail and the supporting structure
- Protects the crane mechanism and increases wheel, bearing and axle life
- Eliminates wear grooving of the rail on the runway due to fretting corrosion
- Distributes the wheel load over a larger surface area, reducing high local bearing stresses
- Has a high recovery rate to dampen each wheel pass and to resist permanent deformation
- Available for all rail sizes
- We recommend the use of welded rail joints when using the crane rail pad
Steel Reinforced
Steel Reinforced
Molyneux steel reinforced crane rail pad is manufactured from wear resistant synthetic elastomer which is unaffected by oil, grease, ozone and exposure to ultraviolet light. The crane rail pad incorporates a bonded steel strip which is encapsulated in the synthetic elastomer. Steel reinforced crane rail pad is for heavy duty crane applications. For the best results we recommend the use of Molyneux cam adjustable rail clips in conjunction with the crane rail pad.
Specifications
| Thickness | Shore Hardness | Temperature Range | Ultimate tensile strength | Rebound resilience | Elongation | Permanent set |
|---|---|---|---|---|---|---|
| 9/32" | 75 +/- 5 | -40°F to +212°F | 2500 psi | 30% | 250% | 5% |
Features & use
- Reduces noise and structural vibration
- Reduces rail wear and fatigue
- Reduces crane runway maintenance
- Reduces stress in the runway structure and the crane
- Totally resistant to water, oil, grease, mildew and fungus
- Absorbs the uneven contact between the rail and the supporting structure
- Protects the crane mechanism and increases wheel, bearing and axle life
- Eliminates wear grooving of the rail on the runway due to fretting corrosion
- Distributes the wheel load over a larger surface area, reducing high local bearing stresses
- Has a high recovery rate to dampen each wheel pass and to resist permanent deformation
- Available for all rail sizes
- We recommend the use of welded rail joints when using the crane rail pad
Intermittent
Intermittent
Molyneux intermittent crane rail pads are designed for runways where the rails are discontinuously supported.
Features & use
- Provides even stress distribution in supporting structure
- Reduces vibration and shock
- The pads tapered edges reduce edge loading on soleplate and grout
- Lips prevent pad displacement from the soleplate
Specifications
| Part No. | Length (L) | Width (W) | Flat Seating (F) |
|---|---|---|---|
| IP110/ | 110mm (4 5/16") | 170mm (6 11/16") | 74mm (2 15/16") |
| IP116/ | 165mm (6 1/2") | 170mm (6 11/16") | 129mm (5 1/16") |
| IP220/ | 220mm (8 5/8") | 215mm (8 7/16") | 184mm (7 1/4") |
| IP250/ | 250mm (9 7/8") | 215mm (8 7/16") | 214mm (8 7/16") |
| IP320/ | 320mm (12 9/16") | 215mm (8 7/16") | 284mm (11 3/16") |
Sectors
We are proud to have worked with a wide variety of clients and consultants across the most diverse range of industry projects and sectors; each bringing its own challenges and specifics in terms of product specification and technical support.
Sectors